|
AC-III™
The best looking bolt-on wheel made for Cobra replicas. We make both 1 and 2 piece wheels, the two-piece construction allows the offset to be varied in manufacturing by moving the center forward or backward before final welding. This allows you to order wheels that will position your tires perfectly in the fender wells. The finished wheel is very light-weight. Wheels are available in most five lug bolt patterns.
The new 18" AC-III wheel is avaliable in Pin Drive and Bolt-on, Please call for pin-drive backspacings.
|
15 x 8 and 15 x 10, cast finish, with knock-offs, lug covers (will clear PBR calipers) |
$1399 |
15 x 7 |
|
3 3/8 to 4 1/2" |
4 5/8” to 3 1/2” |
$439 |
POL |
15 x 8 |
|
3 3/4" |
5 1/4" |
$325 |
POL |
15 x 8 |
|
3 1/2 to 5 1/2" |
5 1/2 to 3 1/2" |
$449 |
POL |
15 x 9 |
|
3 1/4 to 4 1/2" |
4 3/4 to 3 1/2" |
$449 |
POL |
15 x 10 |
|
4 3/4 to 4 1/2" |
6 1/2 to 6 1/4" |
$325 |
POL |
15 x 10 |
|
3 3/8 to 7 1/2" |
7 5/8 to 3 1/2" |
$479 |
POL |
15 x 12 |
|
3 1/2 to 9" |
9 1/2 to 4" |
$489 |
POL |
17 x 7 |
|
3 1/2 to 4 1/2" |
4 1/2 to 3 1/2” |
$489 |
POL |
|
|
|
|
|
|
17 x 8 |
|
3 1/2 to 5 1/2" |
5 1/2 to 3 1/2" |
$499 |
POL |
17 x 9 |
|
3 1/2 to 6 1/2" |
6 1/2 to 3 1/2" |
$509 |
POL |
|
|
|
|
|
|
17 x 9 1/2 |
|
3 1/2 to 7" |
7 to 3 1/2" |
$509 |
POL |
17 x 10 1/2 |
|
5 3/4 to 4 3/4" |
6 3/4 to 5 3/4" |
$425 |
POL |
17 x 10 1/2 |
|
4 7/8" |
6 5/8" |
$395 |
POL |
17 x 11 |
|
4 to 8 1/2" |
8 to 3 1/2" |
$519 |
POL |
18 x 7 |
|
3 1/2" to 4 1/4" |
4 1/2" to 3 3/4" |
$529 |
POL |
18 x 8 |
|
3 1/2" to 4 1/4" |
5 1/2" to 4 3/4" |
$395 |
POL |
18 x 8 |
|
4 1/2" to 4 3/4" |
4 1/2"to 3 1/4" |
$539 |
POL |
18 x 9 1/2 |
|
3 " to 7 1/2" |
7 1/2" to 3 1/2" |
$549 |
POL |
18 x10 |
|
3 " to 8" |
8" to 3 1/2" |
$559 |
POL |
18 x 11 |
|
3 " to 9" |
9" to 3 1/2" |
$579 |
POL |
18 x 12 HP |
|
10"- 5" |
3" - 8" |
$599 |
POL |
18 x 12 LP |
|
9 3/8" - 4 3/8" |
3 5/8" - 8 5/8" |
$599 |
POL |
18 x 13 |
|
|
call |
$729 |
POL |
Red, bold wheels are 1-piece cast and in stock.
Wheels require purchase ET Mags accessories to complete wheel,
2-piece wheels with large backspacing require special Flange Center machining at $65 each.
WHEEL ONLY, WITHOUT ACCESSORY PURCHASE, call for pricing
Decorative Knock Off Kit (polished): $320, set of 4.
Lug Nut Cover Kit (cast): $125/set of four.
Hex cap $45.00ea.
All wheels have polished lip.
Satin finishing of Lip is $50 each.
2 piece wheels are assembled to order with a 1-3 week turnaround. Other sizes can be made, please call to discuss application.
Prices effective June 01, 2020.
*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.
CALIPER Clearance, these are maximum and may be less depending on wheel backspacing.
17" wheel has .9" max.,
18" wheel has 1.125" for HP
18" wheel has .5" for LP
*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.
= See wheel on vehicle. =See photo comparison of wheel in different sizes.
|